Comcokid: Can you link me to any page that would tell more about those laser distance measurement devices. I am giving up on RF, but it seems rational that with white light these measurements should work. One of the problems is that windshields are made from different colours, but since at least...
That is not possible due to the mold that the glass is bended with, depth is measured about 15 cm from the side edges and from the middle.
Straight line from upper edge to lower edge and that difference from glass surface. For example think the shape as a bow, string horizontally (straight...
I would only need to measure the depth of the glass, when measured the glass would be facing down (outside down), inside up. And I would only need to know the depth of the glass from bottom edge to upper edge on a very narrow "shred".
The lateral resolution doesn't matter, but all the...
The machine should be able to measure depth of a car windshield that is facing down and moving. It is a bit hard to descripe the process. Windshield is bended to all three dimensions and the depth of (z-axis) is important for the optics.
Measurement should be taken from bottom to the top of...
There has previous attempts to measure the surface with laser and they have failed. Objects that are being measured are 2 square meters in size, and the measuring distance would be about 0,5 meters. I'm not sure if the white light measuring has ever been tested, I'll start finding out if that...
I'm thinking about building a device that could measure distance from a curved object. To be more specific the object would move under the device and the device should measure the "shape" of the object. I'm looking for tolerance of +- 1mm. Is this possible? Can this be done with some sonic...
