@ABerlinMML
The "best" solution (AFAIK) to customizing the callouts for thread notes is to edit your hole table (while you are in there, you can fix all of the other problems that PTC has with the tables). There is an entire section of the Creo help documents dedicated to this, as well as...
@danielrendon123: I do not have an easy way to test this out right now, but you might try defining a parameter using a relation. Since relations are re-calculated each time a model/drawing is regenerated, that should updated the date as well. Something as simple as: LAST_OPEN = &TODAYS_DATE...
From what you described and the photo, I think capnhook is correct. If it is the talc filler from the rubber, an ultrasonic bath of isopropyl alcohol should allow you to batch several at once for cleaning. Just watch for how long it takes before the bath becomes too contaminated to clean the...
One major item to watch for when placing your lines in the exploded view is which HALF of the axis you select when placing the start and end of your lines. Creo (and all previous versions of Wildfire, and 2001) will select the END of the axis closest to where on the axis you click. In your...
A series of laptops you might want to look at is the Lenovo W series. Most come with an NVIDIA Quadro graphics card, but the price will probably start around your high end.
As for video cards, in addition to the Quadro series, AMD makes the FirePro series of cards which are direct competition...
At the risk of sounding like an idiot here: have you looked at McMaster-Carr for shaft collars? In addition to the standard one-piece, two-piece, and hinged varieties for set sizes, they also sell two-piece clamps with machinable bores (so you can size it to fit the OD exactly).
The other option you have for importing parts is to add them to an existing blank part.
Start a new part using your normal start part, then go to the MODEL tab > Get Data drop down > Import. You should then be able to browse to the file and add it to your part. It will come in as "Import...
Tunalover,
What you are looking for is the *.hol files for each of the thread types that PTC has listed (the files are plain text, just named with a .hol extension). They are located in: <loadpoint>/text/hole for Wildfire and <loadpoint>/Common Files/<date code>/text/hole for Creo (unless you...
There are several ways you could go about coloring text. Three of the more common ways are:
1. Create the text as a sketch, then fill the sketch with hatching. If you lower the spacing on the hatching enough, it looks like a fill. The down side, you can only use one color for the text and it...
Michael,
The issue is not with the lighting location, but with the colors you applied to the part. The default colors in ProE/Creo have a highly reflective surface, and when looking at a shaded model (not in render mode) the software assumes that "you" are the white light source. The way to...
I know this is a month after the initial question, but I seem to recall that Pro/Creo does the number of parts in the BOM based on order of first appearance in the model tree.
I would recommend you check to see what filters and relations are running in the background (In WF4: Table>Repeat Region>Filters and Table>Repeat Region>Relations). I know that there are several ways of adding the '-' that you have there and I am willing to bet there is some code controlling it.
There is one other option: mapkeys. I have one set up for printing to PDF that we have been using with Wildfire 4.0 for about 2 years now. I even took the time to make an icon for it and dropped it right next to my Save As... button on the toolbar.
The only problem is that if you use the...
The title pretty much says it all. I have been asked if I can add a "notes" field to our standard BOM table, which is currently an automated repeat region table. The notes would be unique to each drawing (possibly to each PAGE in a drawing), so I cannot simply add a parameter to the parts...
