I have found conflicting information regarding whether or not A194 Grade 2H can be galvanized. Can someone give me some guidance on this?
Thanks in advance.
I am involved in a project where we are backfilling against an existing below grade wall. There is a street adjacent to this wall that must be maintained. This wall has been in place for 50+ years. I have been told to add weep holes to the existing wall prior to backfilling against it. I am...
Thanks for the input. I should explain that this is actually a large area and only 2 walls are below grade. Exterior grade of the building slopes. Therefore, some of the walls are below this grade. I have called for braced shoring, but the owner would like the option of using the backfill as...
I am proposingto use sloped backfill to provide lateral reinforcement to a concrete basement wall . The building is being demolished but portions of the basement wall have to remain in place as the floor above is removed. Has anyone done anything similar. Also, any methods of placement and...
I am trying to select a metal building manufacturer. Does anyone have any suggestions/input/advice/warnigs? My client solicited quotes from 3 that I have never dealt with before and I need to choose one. They are all comparable.
Thanks in advance
Has to do with IBC Importance factor
I would appreciate some input here.
IBC Table 1604.5 Category III "structures that represent a substantial hazard to human life...but not limited:"
and then it lists various occupant loads. I have an occupant load of 128. As far as I am concerned, this...
I would appreciate some input here.
IBC Table 1604.5 Category III "structures that represent a substantial hazard to human life...but not limited:"
and then it lists various occupant loads. I have an occupant load of 128. As far as I am concerned, this is a substantial loss of human life...