Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by KMort

  1. KMort

    Dispersive surface

    I am trying to best characterize in lay-mans terms dispersive surfaces. Thanks in advance for your help. Keith Mort Franklin International Technical Specialist http://www.franklininternational.com
  2. KMort

    CERAMIC-WOOD ADHESIVE

    Try looking at Franklinadhesives.com Keith Mort Franklin International Technical Specialist http://www.franklininternational.com
  3. KMort

    Bonding and suspending eps blocks 2

    Contact Franklin Adhesives. 800-877-glue Keith Mort Franklin International Technical Specialist http://www.franklininternational.com
  4. KMort

    Conversion calculation

    Most rail cars are painted black. Therefore the sun's radiant heat will heat the container much hotter than the ambient temperature. Keith Mort Franklin International Technical Specialist http://www.franklininternational.com
  5. KMort

    Conversion calculation

    I am trying to get an idea of how long it would take to heat a train rail car above 120°F. Filled with a liquid weighing 10 lbs per gallon. Total gallons are 4,800. The total liquid weight is 48,000 lbs. Lets assume its summer time and the ambient temperature is and average 90°F. Keith Mort...
  6. KMort

    Recirculation pump

    We are trying to develop a new test method that requires fluid recirculation. The problem I am having is fitting a single pump that will evenly deliver varying viscosities (100-3000 cps). The thicker the fluid the harder it is to control the volume. The goal is to meter 10 GPH despite liquid...
  7. KMort

    defoaming device for PSA

    I am looking for any new technology to defoam Pressure Sensitive Adhesives (PSA). I would prefer it to operate inline with the coating operation. Thanks Keith
  8. KMort

    Self Levelling/Low Viscosity Potting Compound

    Perma-Flex Mold Company has an assortment of compounds that may work. Web page www.perma-flex.com Keith
  9. KMort

    Vibratory influence

    My set up is a bulk package that weighs 2400 lbs. Fixed on a large vibrating platform. The materials viscosity is 50,000 cps but can be easily sheared down to 4,000 cps using direct agitation. I am using 2 5hp electric motors controlled by VFD turning eccentric arms. The platform is fixed to...
  10. KMort

    Vibratory influence

    I am trying to shear thin a liquid using external vibratory influence and am having a hard time determining if I should be looking to achieve mechanical resonance or an anti-resonate freq.
See more

Part and Inventory Search

Back
Top