Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by JTPE

  1. JTPE

    Transmission tower analysis/design

    All, Thank you for the clarifications. We are refining our model.
  2. JTPE

    Transmission tower analysis/design

    We are analyzing the existing condition of an existing transmission tower having long (30 ft plus) L2x2x1/4" braces. We have calculated the wind and ice loads per ASCE 7 and built a Finite Element model of the tower. we applied the wind loads and the ice loads to each individual member including...
  3. JTPE

    Isolated concrete pier footings allowed?

    I thought I read some time ago that pier foundations in a seismic design category D had to be linked together with grade beams. That is, an individual pier system to support a structure was not allowed. Is this familiar to anyone? Thanks in advance.
  4. JTPE

    horizontal force factor

    Hello. We are designing seismic restraints for a sprinkling system and are using NFPA 13, 1996 as the specified code. The seismic force is generated by the weight of the water filled pipe. Using ASCE 7-05 (another project specified code) from section 13.3 we calculated Fph = 1.66 Wp. This is...
  5. JTPE

    chute design

    thanks for your time...
  6. JTPE

    Building Inspection Standard

    It may help if you could elaborate on what type of info your looking for. Do you need to knwo what type of inspections to perform, or HOW to perform them? New or existing construction? IBC codes chapter 17 has a thourough list of inspections for new buildings of all types that will guide you...
  7. JTPE

    chute design

    I am looking for information on design of a stepped chute to carry a bulk material discharged from a conveyor. How are the chute dimensions calculated knowing the material properties? I also know the chute angle. The material is being discharged from a valve that has a discharge opening of...
  8. JTPE

    chute design

    I am looking for information on design of a stepped chute to carry a bulk material discharged from a conveyor. How are the chute dimensions calculated knowing the material properties? I also know the chute angle. The material is being discharged from a valve that has a discharge opening of...
  9. JTPE

    Has anyone heard of S-235-JR material for steel

    I am involved in a project where the fabricator has used a material called S-235-JR to fabricate the structural steel. I have never heard of this grade steel, but I am told it has an allowable yield stress less than 36 ksi. Can anyone point me to a spec for this material? thanks.
  10. JTPE

    Conveyor support structure

    I have read through the drift and deflection criteria in the IBC and ASCE 7 and can not find any real guidance as to the allowable lateral drift at the top of a conveyor support. We have a 145 foot bent that has a lateral deflection of 3.2 inches at its top. This seems like a lot, but maybe...
  11. JTPE

    H-pile to pile cap attachment

    Thanks for all of your input! I like the ideas of having a connection that looks like a concrete pile connection (vertical dowels). I tried to stay away from welding the "dowels" but your responses show its really not that big of a deal. THANKS.
  12. JTPE

    H-pile to pile cap attachment

    I am looking for clever ways to attach a steel H-pile to the concrete pile cap...considering uplift. I know of the steel plate welded to the top, but I have overthought that and am not comfortable with a potential cavity under the plate. I have used a "V" shaped rebar threaded through a hole...
  13. JTPE

    Design of leg supported tank

    Can someone tell me the correct design reference code for a LEG supported welded steel tank? I have requested quotes from vendors indicating the tanks be designed and CERTIFIED per API 650 code. API 650 does not seem completely applicable for LEG supported tanks. Is it applicable enough to...
  14. JTPE

    API 650 or applicable code

    I am working on a new tank project and have requested quotes on 14 tanks 20,000gal and smaller. The tanks will contain petroleum based materials. The tanks are all leg supported with several nozzels for filling/emptying and different environmental instruments. I was told to request each vendor...
  15. JTPE

    API 650

    BigInch...you seem confident that API 650 does not cover leg supported tanks. Is that correct? How do you think we have been able to get certification, complete with the certification plate? Is it possible to inspect a leg supported tank and see if it meets the requirements of API 650, except...
See more

Part and Inventory Search

Back
Top