Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jsellers

  1. jsellers

    MathCAD 13 update question

    Because I was having several problems with mathcad 13. I decided to re-install. After I uninstalled both Mathcad 13 and Mathcad 12, I did a search for folders in the documents & settings directory and deleted all folders which contained the word, MATH in the folder name so I got ride of all...
  2. jsellers

    Long Time MathCAD 13 problem

    News flash!!! mathcad started acting strange so I closed it and tried to run it again, and it kept crashing. I then ran the Windows Task Manager and ended the mathcad process tree. I then ran mathcad and to my surprise the tables displayed correctly for the first time in over a year! I then...
  3. jsellers

    Long Time MathCAD 13 problem

    >my version 13.1 shows no error, and, I've never seen this particular problem flagged on the Mathsoft user forums. Actually I posted it in March, 2007 (see link below) http://www.eng-tips.com/viewthread.cfm?qid=180218 Also this appears to be the same problem which a few people had similar...
  4. jsellers

    Long Time MathCAD 13 problem

    Are you referring to WindowsXP service packs or Mathcad service packs? WindowsXP is up to date. My Mathcad version is 13.1 I don't remember if I had the problem with 13.0, but I vaguely remember updating to 13.1 to try to fix it without success. I bought Mathcad 13 before it was sold to SPC...
  5. jsellers

    Long Time MathCAD 13 problem

    This is about the same problem I had in March of 2007 and never successfully solved. (see http://www.eng-tips.com/viewthread.cfm?qid=180218 ) In MathCAD 12 table display works fine, but I have never succeeded in making it work in MathCAD 13. There are options which are supposed to effect this...
  6. jsellers

    Range value doesn't display

    Unfortunately I looked into that and found it problematic. I can get by without the table stuff now that I can display matrix, and in order to install, I have to go back to the original disk, apply an update patch, and install a significant number of add ons...more trouble than it is worth with...
  7. jsellers

    display range variable as a table

    This is the same problem I just now reported in: http://www.eng-tips.com/viewthread.cfm?qid=180218&page=1 There seems to be a bug because the MathCAD help says: "Long vectors and range variables both display using output tables. However, range variables have the row and column labels turned...
  8. jsellers

    Range value doesn't display

    Well I figured out a little, but there seems to be a bug. Range variables are supposed to display as output tables but do not. Here is what MathCAD Help says: "Long vectors and range variables both display using output tables. However, range variables have the row and column labels turned...
  9. jsellers

    Range value doesn't display

    strictly speaking, it is actually j:0;10 <Enter> The default increment is 1 if the second term of the series is not entered. But that has nothing to do with the behavior I am seeing. If nobody knows exactly the cause of this, I will try re-installing. I had to do something like that once...
  10. jsellers

    Range value doesn't display

    I checked that already...calculation is on and I see clues that calculation is carried on. Matrix display OK, and so do variable values, but there are several cases that I get this behavior where I would expect some result. This is Mathcad 13.1
  11. jsellers

    Range value doesn't display

    I have used MathCAD in the past and for the first time in a long time I fired it up and had the following problem. Entered: j := 0;10 and then j= But the j range did not display...what I got instead is what is in quotes: "j=" Nothing else...what I expected was a display of the...
See more

Part and Inventory Search

Back
Top