Dear Rick, I have worked for some years in the surfactant industry. Important details for product managment:
- Suction Pumps and membrane pumps are suitable and they transport almost all of the product and foam. Particularly avoid centrifugal pumps if you have to overcome large pressure heads...
Hi, I have a Hammer mill with 32 hammers used for size reduction of wood dust, from 1 mm to 60 mesh. The capacity of the mill, using a 20 HP drive, is of 50 Kg /h. I want to scale up that mill, which is the procedure? (Area, RPM, Power?)
Thanks for any advice, JS
The energy and mass balances are clear for me to condense the steam coming out from the evaporator (1000 Kg / hr), the fact is that I want to cool the steam with the same juice (similar to sugar solutions at 5 Brix) that i am going to concentrate after, just as a preheater (the juice enters at...
I want to design a shell and tube condenser for steam coming out from a thin film evaporator at 1 Atm. What considerations must be taken regarding steam extractors to ensure that all the steam coming from the evaporator is condensed (pressure drop at the condenser, cooling agents...)?
