Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by johham9

  1. johham9

    M-DESIGN Gearbox

    Can't find this program as a seperate topic, but maybe I'm just looking at the wrong place... Anyhow. I am not allowed to define shaft material seperately, for some reason, whereas the properties for materials on the gearwheel and also the oil seems to be fine to edit the parameters however...
  2. johham9

    NX6 curves, splines, tubes(piping) and stuff

    Yes, the problem with the bridge is that you only can use it "properly" from a curve to another curve and it creates a very nice transition. But when dealing with multiple points, I believe this feature can be difficult to use. Also one solution would to be insert small sections of straight...
  3. johham9

    NX6 curves, splines, tubes(piping) and stuff

    Yep, hydraulic piping. "straight followed by bend followed by straight and so on" I unfortunantly cannot show a picture :( But normally, we just have two connections that we connect with a pipe. And if you let NX decide and dont control the curve, you are gonna end up with a impossible pipe...
  4. johham9

    NX6 curves, splines, tubes(piping) and stuff

    NX6, in plain modelling. Johanna CFD, NX, TC, Drawings, Engineering, Boats, Paragliding, Skiing... vimeo.com/user34572851
  5. johham9

    NX6 curves, splines, tubes(piping) and stuff

    Hi ya'll! Colleague of mine has a problem. But as always, it's like men and asking for direction. So hence me posting it. So, a long story short. He is creating a spline from one connection to another using points(earlier had a problem where he didn't manage to get curvature on the endpoints...
  6. johham9

    NX 6.0 Creating solid out of "empty space" in assembly

    Thanks y'all!
  7. johham9

    NX 6.0 Creating solid out of "empty space" in assembly

    And the result of that attempt was errors, of course...
  8. johham9

    NX 6.0 Creating solid out of "empty space" in assembly

    Waved out all components as bodies, and then did a half-ass attempt to make an assembly cut and tried something to try and unite them together. Can't remember exactly what I did. Unfortunantly, I just signed a paper about not sharing any of the information I got from the company, so cannot...
  9. johham9

    NX 6.0 Creating solid out of "empty space" in assembly

    Hi everyone! I would like to create a empty space-solid(yep, want to export the fluid). I have a assembly with three metric tonnes of different small components, most of them completely irrelevant. What I'm really interested in is the roughly the outer geometry and the interior geometry...
  10. johham9

    Section in view: "Object is not logged"

    Yep! Everything looks just the way it is supposed to in the "regular" views. The problem only occurs when I want to section the part. I have a tunnel, wich I want to have sectioned, and a propeller with 4 blades. One of the blades goes missing...
  11. johham9

    Section in view: "Object is not logged"

    Ops! Forgot to inform that I no longer get an error, I just miss that one component.
  12. johham9

    Section in view: "Object is not logged"

    No interferences! And foi, the pictorial section resulted in same problem AGAIN.... :P
  13. johham9

    Section in view: "Object is not logged"

    Thanks Tomas! Unfortunently, problem still remains. What was the problem in the half-section is exactly the same in the break-out... One component, witch wasn't affected by the cut, will not be visable in the view. Since it never was cut, the section in view doesn't work. Had an idea 'bout...
  14. johham9

    Section in view: "Object is not logged"

    Having touble with a half-section of an assembly. Assemblyn can easiest be described as a tunnel(...open cylinder...) with a propeller mounted inside it. What I would like to do is either to have a half-section with the propeller "intact", or make a break-out-section with the tunnel divided...
  15. johham9

    Point cloud?

    Btw, I'm using NX 6.0
See more

Part and Inventory Search

Back
Top