Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by johanybr
-
Right Allowable Table for Flange Leakage
Oh Thanks dear TGS4 I'm dealing with a Welding Neck Flange, 12”, Thickness of pipe and flange of Sch 120 (25,4 mm), of material A182 F11 CL2 , T(Design)= 305ºC, Pdes= 117 Bar, Axial force= 19.652 N and Bending Moment of 29.234 N.m. The gasket are Metal groove with Outer diameter = 375 mm and...- johanybr
- Post #5
- Forum: Pipelines, Piping and Fluid Mechanics engineering
-
Right Allowable Table for Flange Leakage
Flange Leakage calculation for flanges on a pipe. This question no depend on diameter neither operational conditions (Temperature or pressure), is about materials and right guideline to follow.- johanybr
- Post #3
- Forum: Pipelines, Piping and Fluid Mechanics engineering
-
Right Allowable Table for Flange Leakage
Hi guys I need a guide respect choose the right properties to input for a Flange Leakage analysis using ASME SEC VIII program included in Caesar II (Piping Stress analysis). My doubt is because I have a Flange A182, F11, CL2, and according to database of the same program for ambient temperature...- johanybr
- Thread
- Replies: 6
- Forum: Pipelines, Piping and Fluid Mechanics engineering
