Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Joemaxfp

  1. Joemaxfp

    Class II hose connection help

    The fire department is asking for one Class II hose station in a warehouse. Its been awhile since I have done this and wanted some advice. This is for fire use only. Do I need to have a separate riser for the single hose valve or can I connect to the system. Im looking at 8.17.5.1.3 and .4 it...
  2. Joemaxfp

    Concern

    Sorry, but to clarify they installed regular k8.0 uprights for a rack storage building. We are not working in that area but wanted some advise on what everyone else would do.
  3. Joemaxfp

    Concern

    It was designed that way.
  4. Joemaxfp

    Concern

    So I am doing a job that needs some office sprinklers that need to be changed out and I received the old sprinkler plans. Well, not too old about a year ago installed. I noticed on one of the hydraulic areas that the system has a .385 density and has 8.0 k factor heads? Victaulic V3401 heads to...
  5. Joemaxfp

    Aerosols question

    I want to thank you guys for replying. There are some Level 3 aerosols and looking at NFPA 30B with a ceiling height of 23' or so I would have to calculate a .60 over 2500 with a 11.2 head. They are storing at 5' in cartons on wood pallets.
  6. Joemaxfp

    Aerosols question

    Hi all! I was wondering if I could get some help on this one. Looking at a building that has some aerosols on racks up to 10'. Paints, degreaser solvents, adhesive, pvc cement (liquid can) and some HVAC flush kits. We don't get into a ton of this so just wanted some help if you dont mind. Single...
  7. Joemaxfp

    Storage Question

    the top of deck will be 18' high and slope to 17' and the building is 25000 sq ft. Right now they will be storing all wood doors and cabinets. And I will also confirm the aisle width
  8. Joemaxfp

    Storage Question

    So using the table it looks like I start with 0.37 over 2000 and reduce to .24 over 2000. Am I looking at this correctly? I just to make sure since it will change sprinkler head spacing
  9. Joemaxfp

    Storage Question

    you're right sorry about that.
  10. Joemaxfp

    Storage Question

    I'm try to learn a couple of things on storage. We are looking at warehouse that will have upto 16' storage of doors and windows which I am thinking it falls under class III. With that being said I flip to table 16.2.1.3.2 and with a class III nonencapsulated with 8' aisles I can provide no...
See more

Part and Inventory Search

Back
Top