Can anyone suggest a good place to start when rendering clear plastic? I need to generate a very realistic image of a product, but everything I try in Photoworks looks very bad. For the material, do I use Polycarbonate, Polypropylene, Glass? I need a white background, but don't know if I can...
Ladich,
No, I have not found a resolution to this issue. I would really like to find someone that has some experience in doing this. If you find someone please let me know and I will do the same.
Thanks,
Jack
Timoteo,
I do not have that much experience with PW. I took a digital image of a piece of aluminum treadplate. When I apply this image to my plate in PW, the number of diamonds per inch is not accurate. I didn't know whether I needed to adjust the image before I brought it into PW or if I can...
Hi,
When working with decals, do you have to get the image to scale before you bring it in as a decal, or can you scale it within Photoworks? I would like to apply an image I took of some polished aluminum treadplate to a plate, but when I bring it into Photoworks it is not the correct scale...
I am driving a sheet metal part with a design table. I would like different configurations of this part with some bends up and some down. I can drive the angle of the bend, but the only place to modify the direction of the bend is through the properties of that bend. Does anyone know how I would...
I am using SW2000. I created my circular model, rolledback to obtain a flat model, and made a cut on one of the faces. If I let the cut go thru all, it works, but if I use offset from surface, it rebuilds without the cut. Does anyone have a work around or an idea why this is happening?
Thanks...
Does anyone know how to create a circular sheet metal part, when it has cutouts that do not pass completely through the part? If I sheet metal a block that has a cutout the whole way through, it will work. If the cutout stops short of the opposite wall, it will not work. This is a model of a...
Hi,
Can anyone tell me how to link part or assembly attributes to notes in a drawing template? I would like to have a title block fill in automatically when a view of a part or assembly is made. I believe this is possible, but the help files are not very helpful.
Thank you,
Jack
