Two springs in series w/different masses/rates. They are compressed some distance and "trapped" at this distance in a rigid frame. The springs' ends are attached to the inner walls of the frame. The frame is then accelerated in the axial direction of the springs.
How do I calculate how much the...
Hi all,
Numbers of holes , equally spaced on a PCD. The size of the holes can be quite loose, say, +/- 0.2mm. But what I am trying to think of is a way to control the variation of hole sizes. In sentence speak, Holes can be +/-0.2 but each hole must be within 0.05 of each other.
e.g. dia 10...
Ok thanks for the tips (handleman).
SBaugh, I am too busy designing products to be so interested in watching all the online tutorials just to try and fix a mere annoyance. Hence why asking people that use the software for a quick tip...(you know, that thing forum's actually exist for). Thanks...
The first thing I do on every new model is to edit the light settings to toggle OFF the "lock to model" option. To me, this is absurd. Why would I want the lights in the room to move with the model? This means that the "dark side" is always the dark side. Just seems utter nonsense to me...
Been thinking more. I agree the difference is very negligible.
GregLocock, my point is I can't just apply the normal pressure, as to calculate that normal pressure you need to start with a value for R (interference radius after fitting). So its a bit of chicken and egg situation.
3DDave, you...
Hmm still not happy about having a known size shaft and hole with known material properties we can't just simply calculate the resultant R before we calculate the pressures etc. I get that the sizes are so small its almost neglible but that#s not the point.
I found a reference to Precision...
OK, so I found in Roark's the equations for this; as you both say, treat it as a pressure vessel.
The thing that still bugs me, is that when you work out the initial interface pressure (p), you need to already know 'R' which is the interface radius. How do we know what R is to start with, as...
With regards to a press/interference fit of cylinders, I have lots of information on how to calculate the change in inner member OD/Id and outer member ID, the interface pressure/stresses etc, but one thing I seem to be missing (unless I can't see the wood for trees) is how to calculate the...
Hi Ferdo,
We run LCA/VPM here, so I cannot open the sub-assy in its own window, only in context, so I have to be able to select/activate the lower child sub-assy in the tree.
Thanks.
Regards,
Jon Reynolds
Hi Folks,
I am pulling my hair out a bit. I want to extract a BOM for a product in a lower portion of the main Product. i.e. a sub-assembly.
Product Tree e.g.:
Product (this is the Window's top level product)
-> Product 1
- -> Product 2
- - -> Product 3
- - - -> Product 4
I created a macro...
Hi Folks,
Yes, sorry should have stated, it is ASME. So text note it is.
pylfrm, many thanks for the suggestion.
CheckerHater, the reasoning is because the holes are lightening holes in a circular pattern on a rotating part, so nothing fits in the holes (hence free size tolerance) but want...
Basically, I am trying to think of a way to dimension a pattern of holes where the size of the hole isn't too important, BUT the variation of the size of the holes IS important.
e.g. array of holes: 8X dia10 +/-0.5 (quite a slack tolerance as the size is not too important)
but whatever size the...
