@LittleInch
Thanks for the reply with more detail. I don't have much experience with pumps as you can probably tell but this still felt like one of those conditions where real life =/= textbook ideal conditions for things to work nicely. Again probably just my understanding causing that feeling...
Thanks for all the replies! I purchased the pump and tested. It far exceeds the required minimums for the spec.
The spec doesn't call for a continuous aligned flow column of water, only a jet of water exiting a 6.4mm nozzle achieving a height of 6m. To me that says it can be spread out as long...
Hello, I need to build a pump/pipe system to generate a 6m high stream of 50C water from a 6.4mm nozzle. Hoping to use one of the gas powered pumps from Harbor Freight but want to make sure it can do the job before purchasing.
I've been working through basic bernoulli calcs but I'm definitely...
I have viewed that thread and did find the calculator but it is only for *UN* threads not for M profile.
I would be interested in seeing a spreadsheet for SE as regardless of software, the numbers used to define threads are same.
thank you,
Jason
I'm looking for a custom thread calculator. I have a Machinery's Handbook but I use many non-standard threads. I have tried going through the equations etc. (about 1 year ago, don't have info now) to create a calculator and it seems that there is not enough information to fully define a thread...
I'm preparing for a trip to Ningbo China and I need a high end laptop to take with me that has a lot of storage, large screen, min 2GB RAM, top of line video card, and high end processor. Anyone know of a good source to rent a machine? I'm in Southern California and will be heading to China in...
