Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
jassco's latest activity
-
jassco replied to the thread Is there a preferred true position standard?.Yes. There is an IT grade for different manufacturing processes. If you use a different process, you may want to know what economical...
-
jassco replied to the thread Gap in a feature of size.These are not pattern of the arc. They are part of a circle or cylindrical surface that is interrupted by the slots (feature of size).
-
jassco replied to the thread composite tolerance at lmc : is it nonsense?.LMC protects material, like a minimum wall thickness. It makes a lot of senses. This is math behind ASME Y14.5 standard.
-
jassco replied to the thread How to measure hole diameter?.Hi, mfgenggear It does not matter how many layers the part or assembly has. That is irrelevant. You can consider a hole is made up of...
-
jassco replied to the thread How to measure hole diameter?.Hi, burnswt: Yes. You just need to make two sets of gages. Each gage is made of a plate with a pin. The pin is located at the BASIC...
-
jassco replied to the thread How to measure hole diameter?.Use "Go" and "No Go" gages to check. The gages need to be perpendicular to datum A.
