Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jackorsen88

  1. jackorsen88

    Dimensions numbering

    thanks, actually the problem was , that I did not have an idea what to enter in google search..[bigsmile]
  2. jackorsen88

    Dimensions numbering

    Hello, i have a question i work a lot of measurements according to drawings and its really practical, later to read the measurements, that the dimensions are numbered. But most of the drawings do not have numbered dimensions. Now my question is, is there a tool that can help you to put number...
  3. jackorsen88

    Cannot delete result file: xxxxx.op2

    hello I started to get this error as i run the simulation a few time. First few runs are ok the all of a sudden start to get this error. Does anyone know what could be the problem? I cannot delet the file manualy. I have restarted the NX and nothing is different. Tjank you...
  4. jackorsen88

    Size diference same model

    the model has about 3000 features, different bodies and so on. But the point we started with the same model. We made the same feature, the only difference was he made it in Daimler environment. and the size of mine file was 3x. I suspect on some costumer dažefaults settings, they have something...
  5. jackorsen88

    Size diference same model

    Clean reduces the file size, but thos is not it, because they are not using the part clean where do i toggle saving undo data or not?
  6. jackorsen88

    Size diference same model

    hello, i have a question. I'm working with a company that is using daimler environment. We are using the same version, but i don't have daimler environment. As i make one draft on the sam model, the size of model jumps by 3x. if they make ti in their environment, the size does not increase...
  7. jackorsen88

    TeamCenter visualisation professional .pdo version

    hello, i got some Teamcenter tolerance analysis project and i cannot open it in 10.1. probably version conflict. How can i determine in which version the project was made? thanks
  8. jackorsen88

    NX12.0.1.7 MP1 Measure command drastically changed.

    see the "SCREEN" photo i attached. if i search "Measure" it shows this results. the first result is the new measure icon, second and third is old. This is shown only when i search on my computer, my colleagues do not get the same result, but have the same NX version (12.0.1.7)...
  9. jackorsen88

    NX12.0.1.7 MP1 Measure command drastically changed.

    yes we all have MP1.
  10. jackorsen88

    NX12.0.1.7 MP1 Measure command drastically changed.

    Toost. Its not the problem that we want to have old measure functions, we all want to have new measure function. But the command finder does not find it. The icon for new measure is the ruler but shown diagonally as an icon.. but my co workers cannot find the new measure function not even in the...
  11. jackorsen88

    NX12.0.1.7 MP1 Measure command drastically changed.

    We have a problem. We installed 4 nx 12.0.7.1 versions in our company and only i have new measure function..😂😂how is this possible?
  12. jackorsen88

    Callout Number

    Hello, I'm having a problem. I got an assembly from our costumer and I have to make all the drawings and I would like to have callouts my way. Because I always make BOM in certain sequence . For example if i make mold tool assembly i always make BOM numbers of parts from top to bottom of the...
  13. jackorsen88

    Drawing pattern not exported in dxf

    I'm exporting through export dxf/dwg. I'm using NX 11. Settings for export(see screenshots): https://files.engineering.com/getfile.aspx?folder=e8298808-0f14-4af5-b85e-202a63299f2b&file=1.GIF https://files.engineering.com/getfile.aspx?folder=7d30f382-60a8-4295-bfe8-f58e582e39b4&file=2.GIF...
  14. jackorsen88

    Drawing pattern not exported in dxf

    Hello, when i export the drawing to .dxf, the drawing pattern is not exported with. If i export it to pdf is ok. [banghead]
  15. jackorsen88

    Hole table

    i just wanted that the coordinate system of hole table is visible, because by default, it only marked ORDINATE. You dont know where the positive or negative side is. The only option was, that i create the coordinate system where i wanted, put it on the layer, make the hole table based on that...
See more

Part and Inventory Search

Back
Top