Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by isok89

  1. isok89

    Shear stresses in a node

    Greetings all, How do I determine the shear stresses in a node of a SR4 element? Given in the image below. I tried S12 but the results I get are unclear. Thanks in advance
  2. isok89

    advice on mathematics

    Thank you for the kind feedback. I think I'm going to take the following approach: The book advanced engineering mathematics as a basis and every topic I don't understand I will look up elsewhere (like youtube). To give you some more background; I have been working for almost 2 years as a...
  3. isok89

    advice on mathematics

    Dear all, I am seeking your advice on the following issue: I am a soon to be graduate with a MSc in structural engineering. Soon I'll start with an MSc degree in geotechnical engineering. However I am not satisfied with my level of understanding of finite element method, continuum mechanics...
  4. isok89

    connection modelling in abaqus (time history analysis)

    Dear all, I am planning to conduct a time history analysis of simple masonry residential building (two floors) with a shallow foundation, this includes the soil block with a time signal beneath to simulate an earthquake. I am looking for tutorials or manuals on how to manual different...
  5. isok89

    Shear modulus of wood frame shear walls

    Hello, I am trying to determine the shear modulus of a wood frame shear wall. --> combination of plywood, chords and nails. If anyone here has useful references (international building code or reference) without extended use of formulas I would appreciate if you'd post them. My problem is...
  6. isok89

    Second degree in geotechnical engineering?

    Thanks for all the insights here. I am especially interested that it can be useful for working abroad. Do the geotechnical engineers here have any experience with this? I live in the Netherlands and I can attend Delft University of Technology which has a very good reputation (#7 in civil...
  7. isok89

    Second degree in geotechnical engineering?

    Greetings all, I posted my question also in the 'corporate survival' thread but as I saw there is a specific forum for geotechnical engineers, I'll post it here: I am a junior structural engineer and I have recently completed a Master's degree in Structural Engineering. Currently I have...
  8. isok89

    Second Master degree for a structural engineer?

    Greetings all, I am a junior structural engineer and I have recently completed a Master's degree in Structural Engineering. Currently I have nearly a year of work experience. During my S.E degree I got interested in geotechnical engineering. I have the ability now to pursue a Master in...
  9. isok89

    stresses in global x direction within shell element

    Hi, I'm trying to deduce the stresses in my shell element S4R in the global x-direction. I requested S11 and S22 in history output but there are large differences for the positive (upper surface) and negative (bottom surface). Can anyone explain what the correct procedure is?
  10. isok89

    Beam subjected to moment only

    To summarise the above: I want to create a moment - displacement curve instead of load - displacement curve. What I basically want to know is the bending moment in my section in time history. If someone could please help me, I already tried using Section moments in field variables but I'm...
  11. isok89

    Beam subjected to moment only

    I have subjected a thin-walled beam to a moment load only by using references point on both ends (supports). - Shell elements - Implicit dynamic solver with quasi-static application - moment applied at supports The supports (total cross section EDGES due to shell elements at the supports) are...
  12. isok89

    Wrong eigenmode

    Hi all, I am looking for the first eigenvalue of a three-point-bending simulation. It concerns a three point bending test on a hat profile, by using a point load in the centre. I'd expect to get an eigenmode where the compression flange (upper flange) buckles. However the eigenmode I get is...
  13. isok89

    Abaqus scripting GetClosest command

    Hi, I'm trying to use the getClosest command. When using the vertices.findAt command for specific coordinates, I do get a vertex object as return. When using vertices.getClosest, the return object is a dictionary object as the scripting manual says. However this isn't accepted as an argument...
  14. isok89

    Abaqus scripting

    I'll add some more info, the following is what I have as a test: mdb.jobs['JOB-EXP-'+exp_id].submit(consistencyChecking=OFF) time.sleep(25) mdb.jobs['JOB-EXP-'+exp_id].kill() Everything works except the kill() is ignored, I can even use .waitforcompletion() and it works. It doesn't make...
  15. isok89

    Abaqus scripting

    Hi, I have three questions considering the Abaqus scripting environment. First let me give some background info I am interested in ultimate loads of different types of beams, so the post-failure phase of load-displacement doesn't interest me. I wrote a python script which delves into the ODB...
See more

Part and Inventory Search

Back
Top