Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by hyposmurf

  1. hyposmurf

    sterilize in place a bioreactor

    It is not my chemical project, steam is stated as the mean to sterilize. I was ask to furnish the sterile air supply , and the avoinding the pressure to be below the limit stated, fall on my hea. and I guess such method , but I can not show it by any formula ,or procedure. The bioreactor will...
  2. hyposmurf

    sterilize in place a bioreactor

    In a bio reactor I need to steam heating up to 1 barg to sterilize it. First I will allow the steam to flow trough all openings , then close all it , and let the steam to build up at 1barg for 15 minutes. After it I will shut off the steam. Here it cames my concern, how quick will the...
  3. hyposmurf

    Internal Spline Drawing Question

    see this topic http://discussion.autodesk.com/thread.jspa?messageID=5303380 there is a SCRIPT.zip http://discussion.autodesk.com/thread.jspa?messageID=5303380
  4. hyposmurf

    Old Cooper mining Locomotive

    Does any user know about a under earth locomotive brand SCHALKE 90 TON used at cooper mining??
  5. hyposmurf

    Blower or Compresor

    Hi Quark , can you tell me how do you filter the air to be it sterile?
  6. hyposmurf

    Blower or Compresor

    yes, in other way , but yes. sorry
  7. hyposmurf

    Blower or Compresor

    I have this facts. To supply air at 2m3/min at 1.5 bar abs to a fermentation vessel. Air shall be filtered to 99.99 % particulate < 0.2 micron. Air supply could be 1.- A roots type blower at 1.5 bar absolute 2._ A screw or piston compressor rated at 8 bar absolute. Cons for roots type I can...
  8. hyposmurf

    Mediun pressure air from a high pressure source.

    Hi CRJones , thanks for your's tip , what is yours pro and cons to compressor - blower .
  9. hyposmurf

    Liquid gravity flow - problems with pulsations?

    I would fit a tee at the pipe top part at the start of it just after the pod valve , and a branch to be higher than the liquid level of the pod , so the air will not enter from the down tank, it will take from the atmosphere, and mean while the pod is empty the vacuum release valves will allow...
  10. hyposmurf

    Mediun pressure air from a high pressure source.

    By the costumer requirement I have to supply 2 m3 /min at 0.5 bar,or 70CFM at 7 PSIG . Of course the best option to it is a ROOTS type blower. But I want the source to be a 7 bar or 100 PSIG commpresor , just because I need to filter and dry the air to be esteril, and I can not get filters...
  11. hyposmurf

    1/1000 slug length

    From Wikipedia The slug is an English unit of mass. It is a mass that accelerates by 1 ft/s² when a force of one pound-force (lbf) is exerted on it. Therefore a slug has a mass of about 32.17405 pound-mass or 14.5939 kg. 1 slug = 1 lbf·s²/ft The slug is part of a subset of coherent units...
  12. hyposmurf

    High pressure HVAC

    I know that on ships, the HVAC run in a HIGH PRESSURE air syitem , just to get small duct size . My question is what kind of filter media and shape is used , and what is the standard pressure rated.
  13. hyposmurf

    HVAC CAD DRAFTING SOFTWARE

    Do a search for "hvac software"
  14. hyposmurf

    Lisp help

    could you upload the dwg , or upload to www.yousendit.com
  15. hyposmurf

    Metal Base / Cap

    In old times they where made from a kind of brass. Now they are from aluminiun or a same like alloy, maybe anodized to shine.

Part and Inventory Search