Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by herbj

  1. herbj

    Need an opinion regarding joint failure

    Yes, we did a 2-hr. hydro test at 100 psi and everything held fine. A majority of the pipe had at least 3-4 ft. of fill on it except for the major curb-stop taps, and everything is fine. The line has been in service for about 1 month and has sustained in excess of 200 trips with 20-yard side...
  2. herbj

    Need an opinion regarding joint failure

    I recently installed 2inch pvc glued in lieu of 2inch 160 psi 160 psi slip joint gasketed pipe. The pipe length is 350 feet and is routed in a sweeping curve of about 45 degrees. The pipe was installed in virgin soil that is essentially a sandloam/gravel soil. I have been advised that this...

Part and Inventory Search