Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by helpee

  1. helpee

    Bending moment and Shear stress limits on bolts

    vonleuke: and you are correct - the shear force will be max at 90 deg. my mistake.
  2. helpee

    Bending moment and Shear stress limits on bolts

    vonlueke: This is all still a design problem I am working on so some of the names are not specific. However, There needs to be 2.5 inches of space between Object A and the flat plate because of different obstructions. So there will be spacers or hardened metal sleeves of some sort that the...
  3. helpee

    Bending moment and Shear stress limits on bolts

    My problem is this: I have a flat plate and Object A (Object A: roughly 3 ft. x 2 ft. x 1ft. and 270 lbs.; flat plate: 1 ft. x 1 ft. x 1 in.). Obejct A is to be bolted to the flat plate so that it sits above the flat plate. Three bolts will be used in a configuration that fits within a 2 inch...
See more

Part and Inventory Search

Back
Top