Hello Gentlemen/Ladies,
I have just been accepted to take the CWB1 course with the intention of becoming an Inspector in the QA/QC field in the Alberta Canada area. My question is more for those that are Canadian and have taken this course in the past. I am just wondering what I may have to...
Also negotiations with Inco in Ontario Canada are at a stalemate. As of last Thursday,, nickel is just about $38,050 a tonne (tonne=2,200 pounds). Inco pays for its overhead with the copper and others metals that are a by product of production.
I have a couple of comments regarding your Refractory Heatup Schedule. I am presently on a job in northwest Alberta on a refractory cure on a waste heat boiler that has just had a "patch" repair on the refractory about 7 feet by 7 feet in size. The thicknes is 8" with T-Tech Insulation of 2" in...
Just to let you know the e mail address for Cooperheat that was posted by UncleSyd. You can reach Cooperheat at www.cooperheat-mqs.com . They are a worldwide service company, and are well known in the Industry. Hopefully the address provided will get you in contact with one of their...
As a rule of thumb, I have always used 12,000 btu cooling per 1000 sq ft of space. 12,000Btu cooling = 1 Ton. For example, a 4000 sq ft space with 10 foot ceilings would require in the neighborhood of 48,000 Btu of cooling or 4 Ton. If your in between sq footages,,, always size the evaporator...
I agree!!!,,, Have the water tested at a local health unit in your area, (This is Free in Canada), and discontinue use of boiler until a reputable service company takes a look at your flue. A blocked chimney flue can spill Carbon Monoxide into the building. Not a nice thought
