Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by gsnmech

  1. gsnmech

    oil leak from condensate line in screw compressor

    yes it is an oil flooded rotary screw air compressor. it is the compressor oil and around 100ml per day the oil/water filter has been changed. The air once compressed goes to separator to separate air and oil then it goes to a cooler (air cooler ).there condensation happens in the cooler (...
  2. gsnmech

    oil leak from condensate line in screw compressor

    I am facing oil leak from the condensate drain valve of a screw air compressor. can any body tell me the causes?
  3. gsnmech

    vessels internal coating checks

    we have coat thickness to be achived in each coat and the number of coats and the coat material is also specfied. We have done thickness test and found the coat to be not evenly coated and at some palces the caoting thicness was below the required level. The holiday test will be good test and...
  4. gsnmech

    vessels internal coating checks

    I have a few vessels with bad coating in sea water systems like not uniform thickness, sand on the coating, improper cleaning before coating at some locations. What check can be done on the internal of vessel to check the coating quality after a repair job or when ever i received a vessel...

Part and Inventory Search