Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by govindarasu

  1. govindarasu

    Restriction of ASTM A193 B8 Cl 2 bolting in ASME B31.1 for more than 100 Deg F.

    Dear metengr, Thanks for your explanation. I can understand partially that when the strain hardened material soften if it is subjected to increase in temperature. But I could not realize that ASME Committee restricting even at the atmospheric Temp (100 Deg F). At the same time B31.3 allowed up...
  2. govindarasu

    Restriction of ASTM A193 B8 Cl 2 bolting in ASME B31.1 for more than 100 Deg F.

    Dear Sirs, There is a restriction in the ASME B31.1, Allowable stress Table A-10 for the use of ASTM A193 B8 Cl 2 bolting material above 100 deg F. The allowable stress values were given up to 100 Deg F only. We understand that the B8 Cl 2 material can not be used more than 100 Deg F. How ever...
  3. govindarasu

    Valve Selection criteria for Non Slam Check Valve (Nozzle type)

    Dear Mr. Stanier, Mr Gerhardl & Mr Machiel, Thank to all of you for providing such a informative reply. Thanks
  4. govindarasu

    Valve Selection criteria for Non Slam Check Valve (Nozzle type)

    When we are working in a Oil & Gas or Petrochem projects, the process persons specifying the Non Slam check valve in the P&ID's. In general, Non slam check valve means we will consider the Nozzle type. How ever some vendors proposes the Dual plate check valve as Non Slam Check valve. Of course...
See more

Part and Inventory Search

Back
Top Bottom