Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by glrsbmiqc

  1. glrsbmiqc

    Materials for Applied Linings

    Can Inconel 625 (UNS N06625) be used for lining material in a Section VIII Div. II vessel?
  2. glrsbmiqc

    Clarifications of Sec 1 Boiler code for discharge valves and piping

    What is a Form P-1? Wouldn't PG-11.1 apply for the valves and flanges?
  3. glrsbmiqc

    Sect. IX QW- 290.6 In-Process Repair Welding

    I'm not sure I agree that QW 290.6 applies to repairs performed to the NBIC. Although I agree that the varibles of a temper bead welding procedure will have to be monitored very closely, and that includes the welders technique.
  4. glrsbmiqc

    Sect. IX QW- 290.6 In-Process Repair Welding

    We are currently developing temper bead procedures to be used in conjunction with the NBIC alternative methods to PWHT. Will I need to have our qualified welders to perform the proficiency demonstration when using these procedures for repairs?
  5. glrsbmiqc

    PWHT Sect. VIII Div. I

    Sorry for the typing error, the shell material is P-4 (SA387 Gr.11).
  6. glrsbmiqc

    PWHT Sect. VIII Div. I

    I need to attach some temporary lugs (push-pull) to a section of the vessel that has been heat treated. The lugs will be of P-1 material and attached by 3/8" fillet weld, the shell is P-1 material with a 1" thickness. I don't see anything in sect. VIII that gives me a out to having to PWHT these...
See more

Part and Inventory Search

Back
Top Bottom