Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by ganvis
-
NOZZLE LOADs - EFFECT ON ANCHOR BOLTS
If the nozzle loads are to be considered for anchor bolts design, the impact will not be limited only to the anchor bolts but will include anchor chair design too (base ring, compression ring etc.). What about skirt thickness? In some cases(tall columns), bottom shell course(s) thickness may...- ganvis
- Post #15
- Forum: ASME (mechanical) Code Issues
-
MDT B31.3 Piping & Warmup
Hi reichertc, We do come across similar situation in gas processing facilities during blowdown (gas cooling during depressurization due to Joule Thomson effect). You are not violating ASME B31.3. Firstly, for 600# rating (1480 psi) you are OK upto and including -20 deg F (-29 deg C). For colder...- ganvis
- Post #8
- Forum: ASME (mechanical) Code Issues
