Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Fox99

  1. Fox99

    Dehumidification/Product Moisture Load

    We are able to check capsule moisture levels throughout the process. At specific times with moisture analyzing equipment of which we are able to base our drying times on.
  2. Fox99

    Dehumidification/Product Moisture Load

    317069, We are attempting to remove the moisture through a liquid dessicant HVAC system.
  3. Fox99

    Dehumidification/Product Moisture Load

    Compositepro, The 500mg shell is holding water content. We only need ro remove 10% of the water content from the shell. Just the content of the shell. Do i need to calculate in the other fill material inside the shell, the 2800mg - 500mg = 2300mg. I dont believe i need to calculate in the other...
  4. Fox99

    Dehumidification/Product Moisture Load

    The total mass per capsule is about 2800mg. But we are only removing water content from the shell of the capsule. The shell weighs about 500mg. Of which we need to remove 10% of that moisture content from the shell.
  5. Fox99

    Dehumidification/Product Moisture Load

    Our goal is to be at 68F dry bulb and 20RH. That is achievable with a liquid dessicant system, but the product load really determines what size system to use. So we are really trying to be as accurate as possible with the product load and moisture of lbs/hr removal. We do not want to make a...
  6. Fox99

    Dehumidification/Product Moisture Load

    We are removing 10% of water content in product, not 10% of overall product weight. So you believe it should be (quantity removed per product, per product meaning 129lbs of product each hour / 36 hours X existing product load)? Now would my existing product load be basically the 129lbs hour...
  7. Fox99

    Dehumidification/Product Moisture Load

    Looking for some help in regards to "product moisture load" in LBS/HR of moisture removal to size dehumidification equipment properly. We have pharmacuetical softgel capsules of 500mg each, of which we need to remove about 10% moisture from this product. This issue is that this 10 % water...
See more

Part and Inventory Search

Back
Top