Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by foreng

  1. foreng

    LA Abrasion testing and aggregate surfaced roads

    yes an unbound loose aggregate road, or unpaved (aggregate wear course) road. A low volume rural road. see attached designation 4 aggregatehttps://files.engineering.com/getfile.aspx?folder=32b96541-7569-4117-9a49-809d1e8681aa&file=AT_Specs_for_Aggregate_Production.pdf
  2. foreng

    LA Abrasion testing and aggregate surfaced roads

    In the process of designing a rural aggregate surfaced roads in Alberta, Canada and noticed the that an LA abrasion test for surfacing aggregate (i.e. unpaved road) was not applicable, only required for asphalt concrete pavements and base course aggregate. Just curious why that might be the case.
  3. foreng

    Using ESAL Thoery with Giroud and Han 2004 equation for geogrid reinforced unpaved roads 

    The Giroud and Han 2004 uses number of axle passes and wheel load in the equaition, can wheel load be replaced with one single 9,000 lbs wheel load (ESAL =18,000 lbs)and substitute passes with ESALs for road system ? Example using 100,000 ESALs for low volume unpaved road system with a 5 year...
  4. foreng

    Using ESAL Thoery with Giroud and Han 2004 equation for geogrid reinforced unpaved roads

    The Giroud and Han 2004 uses number of axle passes and wheel load in the equaition, can wheel load be replaced with one single 9,000 lbs wheel load (ESAL =18,000 lbs)and substitute passes with ESALs for road system ? Example using 100,000 ESALs for low volume unpaved road system with a 5 year...
  5. foreng

    Using ESAL Thoery with Giroud and Han 2004 equation for geogrid reinforced unpaved roads

    The Giroud and Han 2004 uses number of axle passes and wheel load in the equaition, can wheel load be replaced with one single 9,000 lbs wheel load (ESAL =18,000 lbs)and substitute passes with ESALs for road system ? Example using 100,000 ESALs for low volume unpaved road system with a 5 year...
  6. foreng

    Calculating impact load on bridge railing of a Cat 797 mining truck

    The bridge we are building is considered permanent, main haul bridge for next 20 years, probably a truck on it every 2 min. Our current design has standard mine haul road earth berms 2m high on approaches to the bridge, the railing was to be a continuation across the structure. The bridge has a...
  7. foreng

    Calculating impact load on bridge railing of a Cat 797 mining truck

    In the conceptual stages of designing a bridge for 797 cat haul trucks (700 ton GVW), looking to calculate an order of magnitude estimate of the force of a 797 truck travelling at 50 km/hr on a concrete barrier. In order to calculate the impact force I need to know the vehicle crush and barrier...
  8. foreng

    MSE Wall demolition

    thanks for the report
  9. foreng

    MSE Wall demolition

    Trying to come up with a demolition plan for a 20 year old MSE wall with severe corrosion of internal metal straps. The wall facing is wire mesh and the wall is 13m high. Looking for some advice on sequencing of demo activities or what potential issues may arise. We were thinking of removing...
  10. foreng

    MSE Wall Repair

    fattdad: Thank you for the information.
  11. foreng

    MSE Wall Repair

    Fattdad, The pilaster and tie back system is interesting, what would be a good reference in order to see what the system looks like. Are the pilasters tied to each other somehow? How wide are the pilasters in general? The wall is 13m high (update from original post) and 100 m long.
  12. foreng

    MSE Wall Repair

    The wall was originally designed for 10 years but has been in service for 18 years. Another 4 years is required prior to demolition. This is why the original design was un-galvanized. The solidifying backfill idea is interesting what would that involve? I have one section of the wall that will...
  13. foreng

    MSE Wall Repair

    Looking for any viable options to repair an aging MSE wall (20+ years old) with severe corrosion of the internal strapping. Someone suggested drilled soil nails with a shotcrete face as an option. The wall has a wire mesh facing and is about 20 m high. The wall will have to overcome large...
  14. foreng

    sizing a drop hammer using the FHWA Modified Gates Formula

    Thanks vulcanhammer for the input. I've talked to my local geotech about wave equation without soil data and he was not interested. I'll keep looking.
  15. foreng

    sizing a drop hammer using the FHWA Modified Gates Formula

    Thanks again DRC1 for the advice, I'll do that.
See more

Part and Inventory Search

Back
Top