Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by FL_Gingineer
-
Marijuana Odor Elimination with AHU Filtration
Have someone perform a blower door test to de-pressurize the room with the complaining tenant. Then smoke test the interior and you will find where the air ingress is occurring. Then you can seal up the room, rather than try to alter the design of the HVAC system. Note, if you go with the...- FL_Gingineer
- Post #7
- Forum: HVAC/R engineering
-
IECC 403.5 - Economizers
Why can't you just use the smaller 5 ton systems throughout the building with 2-position, or modulating, outside air dampers, along with a barometric relief (exhaust) on the return side of each system? Obviously the building layout would dictate if this is possible, but just a thought if you...- FL_Gingineer
- Post #3
- Forum: HVAC/R engineering
-
Uneven heating on HVAC heating coil (air-water HEX, copper fin tube)
Can you post a picture of the piping schematic for the coil? But I do agree with posts above, it looks like you have air in the coil. The air must be bled out or the coil will not transfer heat correctly/evenly.- FL_Gingineer
- Post #6
- Forum: HVAC/R engineering
