Recent content by fastfred

I would like to thank every for such a fast response, I went back to our customer and demanded that they supply us with this old version since they called it out. Again, great forum/friends

I know that MIL-STD-704 is at Rev F, but we are required to test to rev A, and I can not find it on ASSIST data base.

Do anyone know where I can finda copy of MIL-STD-704A?

I have a diode Part number JANTX1N4247 that is ref to MIL-19500/286, this spec is cancelled with out replacement.How can I find a exact replacement for this part and what is the new standard that this part is required to meet?

I have checked schurter and their SMD part will not maintain the 28V at 2 amps, but the leaded part will. I need a SMD part for my app.

I need everyone to help, please help me find a Surface Mount resettable fuse that will hold up to 2.1 amps @ 28 vdc, most of the 60 volt SMD fuses that I have found drop to 6vdc at that current. The application is to install this fuse in line between the 28VDC source and the load.

Can anyone help me find a vendor for a 400hz 115Vac Time Meter?

The material was spec only for annealling, the only varible with the process was suppose to be plasma spraying the copper on the steel. Could this process effect the magnetic properties?

We have a torquer ring that goes in a vertical displacement gyro unit, the ring is made of 416 steel with a copper clad that is plasma sprayed on the front surface. the ring is a left/right directional type that is driven by the torque coil magnetic field. My first question is, What is the...

We have a torquer ring that goes in a vertical displacement gyro unit, the ring is made of 416 steel with a copper clad that is plasma sprayed on the front surface. the ring is a left/right directional type that is driven by the torque coil magnetic field. My first question is, What is the...

We are located in Orlando florida,sorry for the delay, had to go out of town.

We would love to find an alternative, but this is a re-engineering project that has to be the same materials.

Hey guys, I think this torsion bar needs to be sent out to a metal expert.Please advise on a company (or person) that we can contact. Thanks,Fastfred

Hello guys,we are tasked to reengineer a rate gyro that has a floating gimbal assembly,the rate is determined by the force exerted on the Torsion Bar.How can we find out what type metal this is and who can reproduce such a part for us, we can really use the help now.

Thanks alot for the help,with this kind of forum that respond to questions so quickly.I am very happy to have found a vast support group of professionals. Thanks,Debodine for your reply:)