Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by fadel_n

  1. F

    Compensating pressure in Cryogenic Storage Tank

    Thank you GD2 This is exactly what I am trying to find out a solution for. How can I balance the unloading rate and maintaining the same pressure in the Tank to prevent dry ice formation. I have also found that during unloading in the trailers, a return hose can be connected to the storage tank...
  2. F

    Compensating pressure in Cryogenic Storage Tank

    Hallo LittleInch, This is what exactly I was thinking about. Our unloading is expected to take about an hour. In the meantime some of the liquid will vaporize in the tank which in turn will reduce the required size of the pressure building coil.
  3. F

    Compensating pressure in Cryogenic Storage Tank

    Hallo Pierreick our Tank is 300 Ton with 95% maximum filling liquid CO2. The Tanker`s pump has a filling of 20 Ton/hr flowrate. Btw Thank you so much for the PDF of the CO2 properties. It helps alot Thank you
  4. F

    Compensating pressure in Cryogenic Storage Tank

    Hallo Snickster Thank you very much. I have also assumed the same and it seems approximately the same results obtained. THank you
  5. F

    Compensating pressure in Cryogenic Storage Tank

    Hallo LittleInch I have a 300 Ton Vessel with 95% maximum allowable full volume. Our Tanker filling pump has 20 Ton/hr performance. Thank you
  6. F

    Compensating pressure in Cryogenic Storage Tank

    Thank you GBTorpenhow for this valuable info.
  7. F

    Compensating pressure in Cryogenic Storage Tank

    Thank you LittleInch for your response pressure building coil can be with heater or it is simply a finned heat exchanger that can change liquid to gas by exchanging temperature with the atmosphere.
  8. F

    Compensating pressure in Cryogenic Storage Tank

    Hallo everyone, I am new here and I am working in CO2 liquifaction. Our issue in designing the loading station lies in the rate of unloading the liquid CO2 from the Storage Tank. As my understanding and after trying with estimated calculation, for a 300 Ton Tank and with an unloading flowrate...

Part and Inventory Search

Back
Top