Recent content by EngMfg1

DBezaire Thanks, the Script worked perfectly.

what tool bar is rough stock on in GSD?

Sorry, I was a little unclear, DBezaire directed me to a site that has a scrip file but on my end it’s not downloading properly so my last question was directed towards that.

How do I get the scrip file to work?

Is there any way to create a part envelope around a model to get the stock size I will need to create the part?

Is there anyway of doing this with out leaving the workbench I’m working in, example I four blocks stacked on top of each other in a stair step fashion and I want to save top most block as a step file and I also want the bottom right corner of that block to be the new local coordinate system is...

Hi All Is there a way to export/save a file using a defined coordinate system let say I have a complete aircraft assembly and I want to export/save the tail section component relative to a predefined local coordinate system rather then in the aircraft system, how would you do this. Thanks

Sorry you guys I was busy trying to get this to work with the suggestion given, and got tied up with something ells, but what I’m trying to do is, just image you have a 3.0 cylinder x 6.0 long in your left hand and from the top of this cylinder down lets say 2.0 you want to start your draft...

Yes, but I’m trying to understand the taper command a little better.

Hi all How do you draft a wall from a given point, example: say you have cylinder that is 8.0 in dia. and 5.0 tall and I want to draft 1.0 from the top down of the cylinder wall tapering the wall inward. How do you do this using the [Taper] function with in [Feature Operation] tool bar? Thanks

hi all can anybody let me know how to execute a grip program in nx4 thanks

hi all does any body know of a way to create a flat pattern contoured sheet body or to unfold a cylinder thank.

hi all I am a new user to post builder and I choose, inch output 5-axis with dual rotary head and the Fanuc6m control, what are the step I need to take to output G93 inverse time feed rate when the A and B axis move simultaneously. thanks for your help

Hi folks In drafting when I switch between a 2D draw space to 3D using the display sheet icon in the drawing layout toolbar, if I put any kind of text in, using the annotation editor in a 3 dimensional draw space some where on a model that I have been working on, I’ll find that every time I...

How do I anchor one of the corners on part list spread sheet to geometry on a drawing template example a point or an end point on a line.