Replying to above question the lube oil pump temperature and pressure of all 3 pumps is same.
And all 3 pumps are in continuous operation and don't stop
I was having a conversation with a person on LinkedIn. I told him the clearances of the bearings.
Main Bearing Journal Shaft OD is 450 mm
Clearance is 0.36 - 0.60 OEM Recommended
Big End Bearing Journal OD is 255 mm
Clearance is 0.2 - 0.45 mm
The person told that this is excessive clearance...
Also coming to ESD. As in Steam Turbines, ESD can develop due to blades coming in contact with droplets of moisture etc. can electrostatic build up be developed with oil as in crankcase 1/3 portion is filled with oil, and their might be relative motion of crankshaft with oil
When 1st bearing got damaged. The white metal was seen to flow and melted. And this first damage consisted of Grade 2 Babbitt. The crankshaft got damaged also sowe have to replace the crankshaft with new one.
Afterwards when new bearings were used the OEM provided us with Grade 3 Babbitt and...
Sorry for the broken part picture. Now attached is the picture of oil passage.
The lube oil pump is gear type and is making enough pressure, we always check the lube oil path and flow before assembling the pump...
Attached is the picture of lube oil path https://files.engineering.com/getfile.aspx?folder=0949376a-8e6d-4de6-b615-36781c64872c&file=IMG_20240612_143001.jpg