Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by electricalquest

  1. electricalquest

    SWGR induction heating elimination

    WAROSS: Sorry, have to take issue with you over your comment that Faraday shields will not shield magnetic fields. An unslotted copper or aluminum plate installed between a coil and a steel (magnetic) cabinet skin will cut the heating in the cabinet skin. This occurs because the copper or...
  2. electricalquest

    FIELD INSIDE INDUCTION HEATED TUBE

    I hope someone can help with this one. We have an inconel tube, diameter 6 ft, wall thickness 0.625 inch, pumped at 3000Hz with 900 KW external coil. The calculated reference depth is 0.348 inch, so the thickness to reference depth ratio is less than 2. How much of the field is inside the tube...
See more

Part and Inventory Search

Back
Top Bottom