Thanks again for the input, we asked about the progressive scan and got told that
Progressive scan with that sensor is like a camera with a shutter as you described what we needed. That all the pixels is exposed at one point in time and then "read out".
He said that with the interlaced scan the...
When you say searchlight, do you mean the "NIR lightsource"?
Do you still don't think that the camera we got recommended will work with that conlcusion? Or do you have any tip on what characteristics to look for that suits our kind of application in a better way?
Thanks for the answers, really...
We are not 100% sure, but around 13 meters +- 5.
The camera will be mounted at approx 7,5m above the ground, that is also just an approximation by me.
We are in the start of the project and don't have that much information yet.
We are going to do a working demo in their roadside system. We haven't got any details about the budget, but i guess that it will be a decent ammount of money.
This is the hardware that we got recommended:
JAI GO-5000M-PGE
Monochrome area scan camera, Power over Gigabit Ethernet of the GO...
Thanks alot for the input , very interesting!
We got an answer from a store, they said that a possible solution was to use a cheaper and higher resolution camera : silicon-based CMOS.
They also said that you could use a "VIS block filter" so that only the "NIR"-part of the sensors sensitivity...
Hello!
We are two students that are going to start with our bachelor-degree thesis where the goal is to find and try the best possible method to identify the number of people in a vehicle in a roadside custom system which is mounted over the road. This is our first look at the project and we are...
