Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by EDCLTD

  1. EDCLTD

    Epoxying rebar into RC special moment resistant frame.

    Thanks for responding. Type 2 Mechanical Couplers can be used for connecting the reinforcement, however the problem with using these couplers are 1) Length of the coupler for 1” bar = 12.3” which is greater than depth of the beam 2) The diameter of the coupler for a 1” bar is 2.2” which will...
  2. EDCLTD

    Epoxying rebar into RC special moment resistant frame.

    A contractor constructing a RC Special Moment Resistant Frame structure had cut off the column rebar to short at the column/beam interface. The column’s rebars 1” dia, extends only 12” above the poured column at that joint. The original detail is for the column rebars to bend at 90 degrees (with...
See more

Part and Inventory Search

Back
Top