Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by EaZiE

  1. EaZiE

    Can no longer copy properties in SW 2017

    Yes, I believe you could just use notepad as well. Another workaround is opening two instances of SW and switch w/out closing the property window in the other.
  2. EaZiE

    Can no longer copy properties in SW 2017

    Anyone else have this problem? I use this trick extensively. Select multiple rows in custom properties ctrl+c then paste them all into another part and edit as needed. No longer works since installing 2017!
  3. EaZiE

    Flat head Socket Cap Screw Head depth?

    pylfrm, I need this measurement for the c'sink depth. I just measured and hope its accurate enough. I'll be safe if its c'sunk a little too deep. I'm not the one doing the machining so I have to give this info to the machiner who I don't know if he has our screw types. He referred to Master...
  4. EaZiE

    Flat head Socket Cap Screw Head depth?

    On Master Carr a 1/2 head depth is .251 Link However, when I measure mine its closer to .295. Isn't there a standard or am I measuring wrong?
  5. EaZiE

    edit excel based bom template

    felix7502, this may work, it would still require me going through all my parts/assemblies and updating the custom properties to show the folder path. The native SW BOM uses windows folder locations of the part to populate the BOM. That is what I was hoping to include in my Excel version. Thanks!
  6. EaZiE

    edit excel based bom template

    The first shows the typical SW table with a column for folder name added and the locations are generated. For an Excel based BOM you start one from a template. However, the supplied templates aren't very tailored (no folder name). I want one similar to the SW BOM but with the advantage of it...
  7. EaZiE

    edit excel based bom template

    Trying to find out how to edit the excel bom template to include a column for Solidworks folder name so that I can keep track of the locations of all parts in an assembly (w/out opening SW). What needs to be typed in the Name Box in Excel to get this to work? For example, for part numbers you...
  8. EaZiE

    Select Evaluated Value in Solidworks Properties

    The Evaluated Value for Solidworks custom properties is not selectable. Is there any way to make it selectable? Would be useful to have filename ($PRP:"SW-File Name") generated and then I could grab and copy to part # and edited. Our filename is the part # and a description. Or...
  9. EaZiE

    copy drawing sheets loses location reference

    I usually right click, copy, paste to end. I tried dragging sheet into other drawing and I am still losing my dims - turning yellow.
  10. EaZiE

    copy drawing sheets loses location reference

    I like to compile all my assembly part drawings into one drawing with several sheets. A lot of times whenever I copy the drawing sheet from a part into my multi sheet drawing the dimensions will turn yellow, meaning it lost the dim reference. This happens even though the same part is being...
  11. EaZiE

    Strategy for printing?

    Thanks! What would be wonderful is if Solidworks would open drawings straight from the BOM! As of now it only opens parts from the BOM and then you can open drawing from the part but it only auto opens if it is in the same folder, otherwise you have to browse for it. Have the parts tag when it...
  12. EaZiE

    Strategy for printing?

    Thanks drawoh! Sounds like a very good idea for making your own searchable "database" - create a webpage. I'm a little familiar with HTML so I'll have to look into this. Could take a little time to write but may be worth it. Might find a way to automate part of this process. Would be...
  13. EaZiE

    Strategy for printing?

    We probably aren't going the PDM route. Saving all PDF's in one location sounds like a good idea however if there are over 10,000 pdf's I would still have to do a search on each individually. PDFill PDF tools lets me do all the pdf rearranging.
  14. EaZiE

    Strategy for printing?

    I work with a lot of parts shared across many assemblies and they are often modified. The drawings can end up in various locations. When it comes time to print drawings for an assembly I have to go and hunt down where each drawing is. I'm looking for ideas on how to streamline. I'm currently...
  15. EaZiE

    Flex feature on profile extrude

    Swept cut on a rectangle solves it.
See more

Part and Inventory Search

Back
Top