Recent content by eaw1

Folks Which is the betetr coating for bolts/studs etc. in the offshore marine environment ?

Folks, I am doing a rough prediction model for hydrates in hysys. I currently have a sim where i am getting hydrates across a choke. I tried injectiong methanol upstream the choke as a separate stream using a mixer, but this does not make a difference. Can you help ?

FOlks, DO you what is the balst proetction provided by uisng 316 SS x 1/4" thick plates? I would like to use this for hosuing a hydraulic unit with pressures up to 6000 psig. Is there any specs. on this ?

thanks guys

Folks, I am looking for good types of metering pumps. I have experience using sidewinder, willaims and LEWA. Do you guys know of any other leading ones? I am building a new chemcial injection syystem and I need pumps whick can deliver upto 4000 psig, 140 bbls per day. Can be pneumatic or...

I have two gardner denver air compressors (screw) that supplu instrument air on my platform. I would like to extend the re-locate the air ducting or airinlet to the air compressor from next tot he air end to approx. 40 ft. from the air intake valve on the compressor. I belive that once I have...

u mean the unloading/loading times ?

thanks guys, what about prgressive cavity pumps or canned pumps, do you gusy have experiecne in these ?

I have two gardner denver air compressors (screw) that supplu instrument air on my platform. I would like to extend the re-locate the air ducting or airinlet to the air compressor from next tot he air end to approx. 12 ft. from the air intake valve on the compressor. I belive that once I have...

Folks, I am looking for suitable type, vednor or manufacturuer for a pump of the following specs. Any help appreciated > Capacity 17 GPM > Normal Suction Pressure 0-3 psig > Discharge Pressure 20-25 psig > Pump suction and casing must be rated for 100 psig > Temperature rating for pump -20 F...

I currently have 2 rotary screw compressors, air dryer skid and a utility and instrument air system on my platform. What is the best way to determine my air consuption ? I currently have figures relating to the coninuous and intermittent usage of my instruments etc. Some calculations I have...