Recent content by dwoody1

I am trying to find documentation of minimum weld penatration by percent for saftey welds, etc. Is there such a document?

Hellbent, Can you explain how to do this. My UG is not so good.

jec3300, I have done this and the translator runs but I don't get all the geometry. Is there any other way. I have even tried using class selection and picjing the assembly file from the menu. Regards, Woody

Try Elysium.com

All, I know some things have changed in NX3. I need to know how to Export an entire Assy. NX2 was just Export,Iges,Specifiy File,OK. I can export single parts in the Assembly as work parts but not the Assy Any help would be great Dwoody1

Solid7, Thanks do you have anything for v4?

All, How do I get or create ijk points off xyz points? How do I print them out. Is there a macro also? Any help would be great.

bradmac65, I use to have the same problem with very large catia assemblies. I did turn on the virtual window from the F4 function and this helped some. Very large models will make other views seem to disappear. If you zoom out and then re-buffer you should be able to see the views you have...

All, I have 1 machine HPUX v11 running Catia v4 and 3 IBM's AIX 4.3.3.0 running Catia v4. I am in the process of moving my data to a NAS/SAN. I can NFS just fine but my HPUX will not open Catia files direct from the NAS/SAN. Has anyone encoutered this or have a fix for the problem. I am able to...

Thanks for feedback

Hello All, Can you open a Catia v5 part (.catpart) in UG NX1 or NX2 not using STEP or IGES. I heard that you may be able. Thanks,

Me again, Does anyone know about DOL sheets for GM, Die Operation Lin-up sheets. These are for progressive dies. We only use UG NX1 once in a while and we have a need for some editing of these sheets. Contact me if you do. Thanks in advance

All, I need to remove hatch on a drafting view. I don't know how. Any help would be great. Regards,

Hello to All, I am currently running v4 IRIX and plotting to a Calcomp Techjet 5500 Model 5536. I send a plot of just text with lines in v5 to the same plotter from windows XP and the plot takes 1 1/2 hours. Same sheet in v4 takes 5 minutes. any ideas? Any place I can call or contact. Thank you...

All, I have been trying to create a entire plan view of my die from v5 onto a drawing sheet. I can create the individual sub-assemlies no problem. If I load all of them together it blows me out of Catia or I get an error: Error type= CATbase error Error name= Null Handler Error Number= 131073...