Recent content by dvcrogers

Turns out it was a driver issue. Thanks to this site I was able to eliminate a few posibilties and narrow it down to the driver problem.

Well, I was a little wrong before. I cannot get it to plot to the HP Designjet 4000. I CAN plot it to our copier and a smaller HP copier. I think has to be in the drivers, but I am not sure.

Thanks for the reply youngEIT. I tried reducing the DPI, no luck there. I dont get a HIDDEN option under MVIEW. I did find out that I can plot the image while in model space. I still cannot plot in my layout view. Is there a way for a viewport to cause this problem? Dave

I have been away from Autocad for a few years now so I am a little rusty. I am using Land Desktop 3 and I have inserted an aerial photo that is a .sid file. I have it on it's own layer which is unlocked, thawed, and plot-enabled. I cannot get it to plot though. I have tried IMAGEFRAME-it's set...

Thanks for all the help. What was happening was the info that I had was in State plane and I was told that it was not. I have one more question. Can I draw at specific coordinates? I mean, if I have a Garmin GPS unit with a waypoint in it. Can I, draw a circle with the center at that waypoint's...

Scott, you made a good point about state plane coordinates. I need to dubble check that. I have the text files with the same name. I have a feeling the problem lies in the GPS points from the surveyer. These are in an ACAD drawing already so I dont know how I should check those or re-insert...

Guys and gals, I need your help in an aera I know nothing about. I am running AutoCAD 2000(LDD 3 & ACAD map) and I am trying to insert aerial photos in a layer along with some GPS points from a surveyer. I am having trouble getting the GPS "points" to overlay on the photos correctly. I am using...

I am looking for any websites that you can recommend for high quality DOQ's photos in Arkansas (batesville. The cheaper the better. Free is great! I like the products from Geostor, but are there any other places out there. Thank you for your time. D. Rogers

Thanks to everyone. You have provided me with the information I needed. Thanks again D. Rogers

Just wanting to know the difference between the two. Thanks.

I am about to "spec" some 15kv breakers and I was wondering if there is a difference between them and reclosers. Are the ratings different? Is a recloser a breaker with relaying? I am just trying to get an angle on my spec. Thanks in advance. D. Rogers

Thanks: FYI PDf995 works great!

We are using Land Desk Top Development along with A-Cad 2000

AutoCAD menu utilities loaded. "Can't find file: aecmodeler30.dbx" ; error: quit / exit abort Does anyone know what this is and how to correct it? Thanks DRogers

Thanks for the quick replies!