Does anyone know if there is a way to automatically regenerate a part after a modification such as a dimension lengthens? I'm open to any suggestions, I would prefer to use Pro Program if possible? and would like to stay away from a mapkey. Any suggestions?
ok, what it wants is references, it will highlight a feature from the orginal part and all it wants is the new reference for that particular feature on the new part. example:
if it highlights an edge that an dimension was attached to from the orginal part it just wants a new edge on your new...
your arrows need to be in the same direction if you don't want it to twist. say you are creating a sketch of a c- channel and say the arrow on the first sketch you are creating is on the bottom pointing to the left, then you go to the second sketch and you create a smaller c-channel shape but...
no there are no catalog of parts that come with proe, however, if you need hardward and don't want to make it yourself do a search on the internet and you should be able to find what you need.
Proe is working correctly, the thicken functionality is a surface or shell command, in other words it only works with surfaces or shells not solid geometery. can you explain your sketched profile or shape of the part so i have a better understanding of what you are trying to acomplish?
if you are trying to add a tool to the toolbar when in sketcher mode, you must be in a new sketch, it will be greyed out if you try this in an existing sketch. so create a new dummy sketch add the tools needed and then cancel the sketch. go back to the older sketch and the new tools should show...
HORA,
THANKS FOR ALL YOUR HELP WITH EVERYTHING, I STILL HAVE A FEW ISSUES BUT I THINK I CAN MANAGE FROM HERE, I THINK I WILL BE FINE, BUT JUST IN CASE I RUN INTO SOMETHING I'LL RESPOND BACK TO THIS POST. THANKS A BUNCH FOR ALL OF YOUR HELP!
THANKS,
DUSTIN
Hora, you were right about the features being linked as the problem, i tried the new technique i described in the last post and it worked on the test part example however i fixed this in my original model and it still has a problem. i will investigate some more and get back to you with the...
ok, i try a different approach creating a second main feature and merging the first main feature with the first group and the second main feature with the second group, i'll let you know how it works out, if your to busy to respond today thats ok, mayby tomorrow.
Thanks Again,
Dustin
Hora, hope you had a good weekend, please let me know if you get anywhere with the last example? also do you know if there is a way to regenerate using pro program so you don't have to do it manually?
Thanks,
Dustin
Hora,
ok you to, again i appreciate all your help, if you give it a try and you can't figure it out then I'll just give up on making this work, i would just like to know if it is possible and how to do it if it is. Thanks again.
Dustin
no I dont think that is it either, if you have time here is how you can alter the file you sent me (takes only a few minutes, very quick)and then you know exactly what i have.
1. first delete the conditional files in pro program and delete the last cut.
2. change the first protrusion to a...
Hora,
i tried your new example and it works with your example but i think because my situation is still different enough that it doesn't work in my case. Please let me know if you where able to open the last file i sent? if not i can probably explain how to modify your example to make it like...
i will try our latest suggestion but meanwhile i sent the backwards compatible file and a word doc on how to do this (real easy) to the same place i sent the other files. i'll let you know how the latest thing works out, let me know if you have any sucess at working with the latest file i sent...
