Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dunnlg

  1. dunnlg

    Ok new question..

    Tony, You must have the "Generative Shape Design" or "Wireframe and Surface Design" modules. LMB on Start, and hopefully you will see those choices. Activate one of them and then you will see a "point" icon. Not all businesses purchase all the needed modules. Laura
  2. dunnlg

    constraining to an edge

    #3= create arc, add R15 constraint create arc, add R15 constraint rmb on const to modify / radius.2 object / edit formula =a table, click on constriant to "copy" from and result will be R15 f(x). When you modify the R15 constraint, the R15 f(x) will follow. Laura
  3. dunnlg

    V5 Electrical Wire Harness Installation 2?

    Am a contractor brought into electrical group. Group needs the tools you mentioned. Corporate says these tools are not ready for prime time. Was curious if anyone was using them successfully.
  4. dunnlg

    V5 Electrical Wire Harness Installation 2?

    Is anyone using this suite of modules? If so, what resource did you use to get "up to speed"? Thanks in advance-Laura
  5. dunnlg

    Cleaning v5 models

    Or type "c:delete useless elements" enter. Laura
  6. dunnlg

    V5- VPM training, where?

    Class listings can be found at www.3dplm.com/en/education/classes.asp
  7. dunnlg

    V5- VPM training, where?

    Where is VPM training available? Job postings want V5 with VPM. INCAT helpdesk suggests checking with IBM or Dassault. My email to Dassault in Canada remains unanswered. Thanks in advance- Laura
  8. dunnlg

    V5-runtime error, abnormal program termination

    I have a 15 sheet .drawing of a .product with about 150 parts. 13 sheets will update, 2 sheets will not. I am running R9SP4 with 512 megabytes memory. Any suggestions will be appreciated. Laura
  9. dunnlg

    V5-how to force .drawing link change

    I’ve tested the File>”save management” “save as” twice with excellent results with a paired set. Thank you. Now, can I also apply this to a mixed set? I’ve tried this same routine with unrelated .product and .drawing without success. When I open the “new/saved as” files in the new folder, the...
  10. dunnlg

    V5-how to force .drawing link change

    If I have a .product & .drawing, then want to make a similar .product & .drawing, what method will allow me to “rename or save as new” each file, and force the .drawing link to agree? Am on R9SP4. Thanks in Advance
See more

Part and Inventory Search

Back
Top