Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by DRLEI

  1. DRLEI

    Design of Pile Supported Footing for Cantilever Retaining Wall

    Thanks for the guidance InDepth. It was modelled as a plate (subsequent to the post) using STRUDL and the stem stiffness was not added to the plate. The pile guys do not want to place more piles than are reasonably required. I spaced the back row on the retained side at about twice the front...
  2. DRLEI

    Design of Pile Supported Footing for Cantilever Retaining Wall

    Have a topic regarding a Cantilever "L " Retaining Wall that is supported on a footing that is to be supported on Helical Pull Down Piles. Pile spacing in the front row (under the stem wall) is approx. 5 feet and about double that in the back row (at the heel). Height of retention is less than 5...
See more

Part and Inventory Search

Back
Top Bottom