Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by DonMcC

  1. DonMcC

    Big Dig

    The nuts weren't loose; it appears that the bolts were. From what I'm reading, epoxy is used to bond the bolt to the concrete. But to be effective, the hole must be clean, the bolt must not have any grease on it, the epoxy must be mixed in the correct ratio, moisture must be avoided, and it...
  2. DonMcC

    Big Dig

    ...and a graphic from the Boston Globe: http://www.boston.com/news/traffic/bigdig/articles/2006/07/12/Cutaway_view_of_tunnel_ceiling/
  3. DonMcC

    Big Dig

    This article looks at the suspension system used to hold up the concrete slabs. http://news.bostonherald.com/localRegional/view.bg?articleid=147984&format=&page=1
  4. DonMcC

    Current Engineering Salaries

    I spent the last ten years in the manufacturing industry as an electrical engineer. In my region, manufacturing has been declining, making it difficult to find stable employment. I thought that if I got my PE license, it would be easier to find work, but that hasn't been true, mostly because...
  5. DonMcC

    Crowdsourcing

    Corus, I can answer your questions for $15...each.
  6. DonMcC

    looking for high current right angle pins

    Try Positronic Industries, www.connectpositronic.com
  7. DonMcC

    Is it worth it to get a PE license?

    Raffaello: If you want to go off on your own and design products, there is nothing stopping you. You can call yourself a mechanical designer, list what your skills are, and perform all those skills. The only thing is that you can't call yourself an "engineer", offer "engineering" expertise...
  8. DonMcC

    PCB board protyping

    Eagle Layout by Cadsoft.de sells a very inexpensive layout package. The basic version (about $200 ?) should support a PCB of your size.
  9. DonMcC

    LIGHTINING PROTECTION FOR HAZARDOUS AREA

    In the US, see NFPA 780: Standard for the Installation of Lightning Protection Systems 2000 Edition. If I remember, it costs about 40 US. Chapter 6 is titled: Protection for Structuures Containing Flammable Vapors, Flammable Gases, or Liquids That Can Give Off Flammable Vapors.
  10. DonMcC

    Automotive Engineer's Salary chart?

    I have also wondered whether I am selling myself short. One of the things I have been tempted to do was to place a blind ad in the newspaper: Electrical Engineer Wanted: Must have 5-7 years experience in switch mode power supply design, thorough understanding of magnetics, EMI, layout, and...
  11. DonMcC

    Industrial Exemption for Engineers... Fact or Fiction?

    From Connecticut General Statutes, industrial exemption is explicitly stated: Sec. 20-309. Exemptions. The following persons shall be exempt from the provisions of this chapter: (1) An employee or a subordinate of a person holding a license under this chapter, provided the work of such...

Part and Inventory Search