Thank you to everyone that posted on this thread, your thoughts have led me to a final design. 90mm PE 100 12 bar pipe will be used as the gravity line. 3 open to atmosphere tanks of 15 m3 each will be installed, one approximately every 800 metres of pipe length which is very close to every 80...
Thank you to everyone that has taken their time to reply to this post. I can use different pipe sizes and bar ratings and am now looking at PN25 alkathene pipe in 90mm and 110mm OD. To bimr, is there some way I could get a design for a pressure reducing station. I have only found some sketches...
Thank you littleInch and bimr for your response. firstly the green water is the term we use for the effluent after all the solids have been separated out. this is a 2 pond system where all effluent gravity feeds to the 1st pond then only the watery liquid is passed through to the 2nd pond...
Looking for some help on a gravity feed greenwater effluent line. I am new to these threads finding them while searching key words on the web. I work in the dairy effluent pumping business designing systems for farmers. Now I have been asked to design a gravity feed system which is outside what...
