Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dkgpune

  1. dkgpune

    Moment of Inertia of a typical trapezoidal-type corrugated sheets.

    HI, Could you anybody support in finding out Moment of Inertia and Moment of Resistance for a Sheet with following characteristics. attached is a figure with key generic dimensions. Any help/pointers/formulas would be greatly appreciated. Thanks, DG...
  2. dkgpune

    movable jig/fixture/tool for veirfying tapering issue in rectangular/square sheets

    tapering in thickness. Usually one or two corners are out of square. Size could be 15mm x 15mm to 1200mm to 600 mm. Attached is a picture of tapered piece. We have thousand of such pieces hence a solution (low cost) to quickly verify the tapering is...
  3. dkgpune

    movable jig/fixture/tool for veirfying tapering issue in rectangular/square sheets

    Hi, I'm looking for solutions (movable jig/fixture/tool..) for veirfying tapering issue in a rectangular/square sheets. Any pointers. Thanks, -Deepak GUPTA
  4. dkgpune

    Screen Strength

    Thanks! I was working on similar lines and performed following calculations albeit highly conservative and crude approach... What is the opinion of expert on this...how can i further improve it make them more credible and robust.... Appreciate your...
  5. dkgpune

    Screen Strength

    Thanks for your tips! In this case i want to manufacture this. Existing manufacturer are not providing this info as such. Moreover, i would like to learn the physics/mechanics behind the calculations.
  6. dkgpune

    Expanded Screen Strength

    Dear All, Here is the scenario: There is an expanded metal screen (steel G550) with diamond shaped openings. An example is at http://www.dexmet.com/Expanded-Metals.html I know the basic dimensions of such as screen LWD, SWD, SWO, LWO, thickness etc.. The question is if a given expanded...
  7. dkgpune

    Screen Strength

    Dear All, Here is the scenario: There is an expanded metal screen (steel G550) with diamond shaped openings. An example is at http://www.dexmet.com/Expanded-Metals.html I know the basic dimensions of such as screen LWD, SWD, SWO, LWO, thickness etc.. The question is if a given expanded...
See more

Part and Inventory Search

Back
Top