Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
dik's latest activity
-
dik replied to the thread Things are Starting to Heat Up - Part XIV.You must have provided a lot of help to China... they are leading the pack with about 40,000 miles of it. -
dik replied to the thread Things are Starting to Heat Up - Part XIV.It's in operation... maybe Santa Cruz Metro should consult with them? The US seems to have problems with high speed trains, too.
-
dik replied to the thread Things are Starting to Heat Up - Part XIV.Electric Busses...
-
dik replied to the thread Thread embedment required for bolt in tension.In response to your question... Not at all, but I'll check. Reply back.... "To weld to CSA W59, a weld procedure qualification will...
-
dik replied to the thread air in sidewalk.Concur...
-
dik replied to the thread Odd Wood Connection.With mechanical equipment, I use Loctite 'red' to secure nuts.
-
Any suggestions on how to apply a wind load to this. I was thinking about using the area of the top with a wind load using half the...
-
-
dik replied to the thread air in sidewalk.It's not the strength, it's the air entrainment...
-
dik replied to the thread air in sidewalk.Freezing water can develop a compression force of 2ksi. 9000 ksi concrete has a tensile capacity of about 1/10 the f'c or about 900...
-
dik replied to the thread Bending Class of Reinforced Steel Beams.See this discussion... https://www.eng-tips.com/threads/section-class.511413/
