Thanks for the feedback.
GS3, yes I've tried that. Doubled the series cap to 20uf, but did not see any appreciable difference.
nbucska, only 1 secondary (farthest from driver)had a 130 ohm termination load, while the rest had none.
Hello all,
I am having a problem with dc offset on my signal when I try to drive a large number of 1:1 signal transformers
in parallel.
The input to the primary side of the transformer is a 64KHz DS0 composite clock pulse (i.e. alternating bipolar
pulses with 2 pulses in the same direction...
