hey guys,
i pulled apart all the wiring harnass'..the power to the light switch did come directly from the stator and was in parallel to the voltage regulator..out of the 75+ wires on this little bike i found one switched 12vt lead...i pulled the thumbswitch wire from the stator output and...
this is a small 110cc quad i am talking about..battery is fine..
i am measuring voltage at what was the old headlight feed..my intent is to simply use this as coil voltage..a new feed for the lights was pulled from the battery and run through the isolated load side contacts of the relay..
it...
thanks for the quick reply Keith...
i've Googled for a 12V AC relay and came up with nothing..the AC relay would be the easiest solution if i knew where to find one..
i also wasn't sure if the AC relay would hold with the stator power source..it's not really AC..remember, i'm a...
i am a commercial electrician by trade..i'm trying to solve a problem i have..
i am trying to increase the lighting output on my daughters 4 wheeler..
i have installed (2)55wt/12vt lights in place of the (2)original 35wt lights..because of the added load i decided to run them through a relay...
