Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Deividas

  1. Deividas

    Hydraulic lifter wear

    Brian Malone - no, oil is clear, any water in it. Sorry, I forgot to mention, it's 4 cylinder dohc engine
  2. Deividas

    Hydraulic lifter wear

    Some more pictures of hydraulic lifter: Sorry, but I didn't take pictures of camshaft
  3. Deividas

    Hydraulic lifter wear

    Hello, Maybe someone has ideas, how in ~1000km exhaust hydraulic lifter can wear like in these pictures: Also, camshaft lobe for this lifter is also worn, but I don't have pictures of it. Engine has 16 valves, but only one lifter is worn, other lifters and cam lobes are in good condition. I...
  4. Deividas

    Cylinder hone after 10k km

    3DDave - yes, machine shop replaced exhaust valve guides and exhaust valves, but intake valve guide seals also popped off, and as far as I know, intake valve guides are still original
  5. Deividas

    Cylinder hone after 10k km

    Tmoose - sorry, I misunderstood you. These seals in your link are same as mine
  6. Deividas

    Cylinder hone after 10k km

    Tmoose - it's 2000 Alfa 156. When I was rebuilding engine, I sent cylinder head to machine shop to resurface it and they also changed exhaust valve guides and exhaust valves, they removed old valve stem seals, so now I don't know if they were out of place or not. I used non OEM valve seals...
  7. Deividas

    Cylinder hone after 10k km

    Pud - no, there is no spring on seals to hold them in place. Also there is no groove on valve guide. Valve guide surface is smooth
  8. Deividas

    Cylinder hone after 10k km

    Hello, After few hundreds km valve stem seals popped off again. First time I used oil to fit them, second time I installed them dry, because I thought that maybe they popped off because of being lubricated inside. Both times I installed them with socket and they fit pretty easy without too much...
  9. Deividas

    Cylinder hone after 10k km

    Hello to all, So, as I planned, I changed valve stem seals without removing cylinder head, almost all of them were not "fully seated" and also found intake manifold gasket oil leak (there is variable valve solenoid on intake manifold), so replaced this gasket also. Assembled everything as it...
  10. Deividas

    Cylinder hone after 10k km

    3DDave - how You can see valve stem leakage with compressed air in cylinder if valve is closed? Cylinder head was checked before installation, and there was no leakage between valves and valve seats
  11. Deividas

    Cylinder hone after 10k km

    3DDave - yes, I know, but i don't see difference between these two methods
  12. Deividas

    Cylinder hone after 10k km

    3DDave - yes, method with air compressor also should work, but I don't have air compressor in my garage and I don't want to buy it just to use it once for this job
  13. Deividas

    Cylinder hone after 10k km

    Today I saw video on Youtube and decided to try my luck, when it gets warmer outside, and try to change valve stem seals without removing cylinder head. I think simple method with rope/shoelace inserted in cylinder through spark plug hole with piston at TDC should work just fine, so this way I...
  14. Deividas

    Cylinder hone after 10k km

    gruntguru - I tried to do this, but I think it was too late, because I did it about 2000 km after rebuilt. Or maybe problem is not with piston rings
  15. Deividas

    Cylinder hone after 10k km

    Thank You all for answers, I will try to tear down this engine again in spring and inspect where is the problem. And if I'm lucky, maybe new rings will solve my problem. Also I heard few cases, that on these engines valve stem seals can fly off from valve guide boss, if it's my case, then it...
See more

Part and Inventory Search

Back
Top