Hi to all
Using NX-6.0.3.6
I select Help -> Documentation, the help library displays.
I select Teamcenter Integration for NX.
How can I print out a complete topic?
Say the subject material in 'NX Assemblies/PSE',
that includes the material below the slider bar?
Your help is most welcome...
Using the hole command in NX-6, how can I have different diameter holes produced on a single sketch surface. Example:
rectangular plate with 2 holes .5 dia. and 2 holes .75 dia. using one sketch plane.
Your help is most welcome
Dan
Hi:
I found using View > Display Settings > Model display > Shade Tab > check box > With edges
The shaded model will display with contrasting color displayed edges. So is there a user defined edge color available?
Thanks, Dan
Hey
Newbee here, can Pro-e display a shaded solid with the edges in a different color or any color that hightlites the edges?
Your help is most wecome.
Thanks, Dan
Hi to all
Newbe here.
I am starting to learn wildfire 4.0 student edition.
When I start the sketcher palette for the saved sketches I find nothing. How do I get the tabs to show up for the different shapes?
Your help is most wecome.
Could a user defined radio button be added to the Rendering Style pull down which
would have the dashed hidden line option? And if so what would be the commands necessary
to accomplish this.
Forever grateful dan.
Passing along a note I have, can't remember who to give credit to.
The following method was written for UGNX1 or 2, don't know if it's changed on later versions.
First save the data you want for the points to a text file with a .dat extension which is what UG reads.
You do not need to include...
In drafting, place a dimension. With the dimension still highlighted select the third Icon, Break/Other. At the bottom select 'NOTE' then select the dimension, it will find the attach point. You can position the note afterwards.
In the NOTE command area, 4th from the bottom, select 'CALLOUT...
Hi.
In NX4 under File: Open I-deas, which accessed I-deas models directly from the
I-deas Team Data manger. I can only access parts and assemblies. I would really
like to get an I-deas part and asscoiated drawing into NX. And remain associative
in NX.
Is this at all possible?
Thanks for your...
