Hello All
I have turned off (treat degree 1 Spline as polyline) several times.
Restarted NX and (treat degree 1 Spline as polyline) comes up as toggled off and
it is still converting everything to a
convergent body? SOS
Anybody have any suggestions. Just started happening out of the blue...
OK, A BIG DUHHH OVER HERE
I WAS CONVERTING MODEL TO VIEW IN VIEW DEPENDENT EDIT
I USED VIEW TO MODEL AND IT WORKED (SHOWED UP IN MY VIEWS)
I ALSO FORGOT TO REORDER MY REFERENCE SETS. (THANKS JOHN)
IM NOT SURE THAT WORKED
fIRST I DONT KNOW WHAT VIEW (IN MODELING) THE SCRIBES WERE CREATED IN
SO IN DRAFTING I MADE EVERY VIEW THERE WAS AND IT DIDNT SHOW ANY SCRIBES.
SECOND WHEN I GO TO VIEW DEPENDENT EDIT
IT WILL NOT LET ME SELECT SOME OF THE SCRIBES TO CONVERT FROM MODEL TO VIEW.
SOME...
IM TRYING TO HAVE PART NUMBERS IN MY VIEWS
ON MY DRAWING, THEY ARE THERE WHEM IM IN MODELING
BUT WILL NOT SHOW UP IN MY VIEWS IN DRAFTING
HIDDEN LINES ARE DASHED SO I SHOULD SEE THEM
JUST NOT THERE?
Thats what the problem was on that solid
I had to fix a 3 sided rad at a intersection
of 2 ribs.
This is the first time I have seen this
Forum and it has been a great help..
Thank you John
OK,
Heal didnt work for that part
Went ahead and found the problem area fixed it and
scale body did work gave me my different shrink rates.
The question I have is that this part has been a solid
from the the word go and i used all kinds of
solid functions. NX told me
it was a good...
Yes 7.5
I always used the scale through the
transform option.
I went ahead and used the Insert -> Offset/Scale -> Scale Body
on a simple solid (support post) and it worked using the scale body
The part i need to shrink was a solid from PRO_E.
tried it on that and it failed. It is a solid...
i have tried and tried to
give a expansion rate x .016 y .016 and z .023
and it will not do it
tried on a solid no go
tried on sheets no go
exported out sheets as a igs brought them back in NO GO
Please help....
I do injection molding that requires 2 differnet shrinks for the...
